Mermaid M9 Cool & Reverse Cycle Unit – 9,000 BTU’s – 110V. With a cooling capacity of 800 cubic feet, the Mermaid 9,000 BTU unit is designed to cool / heat up to a 30′ cruiser or a 32′ sailboat. The ultimate in climate control – this unit packs the perfect punch of cool, comfortable air to keep your cabin temperate. M9RC110.

Mermaid M9 Cool & Reverse Cycle Unit – 9,000 BTU’s – 110V

With a cooling capacity of 800 cubic feet, the Mermaid 9,000 BTU unit is designed to cool / heat up to a 30′ cruiser or a 32′ sailboat.

The smallest 9,000 BTU on the market; it is almost the same size as the Mermaid M6 unit. In order to keep the smallest footprint on the market, Mermaid utilizes the same stainless steel base as the Mermaid M6 (6500 BTU) unit. This unit will run off of a Honda 2000 generator. This unit is available in right, left, or top air discharge configurations. Mermaid uses a 6″ and 4″ ducting and recommend a minimum of three 4″ round supply grills with this installation.

With Reverse Cycle Heating
With reverse cycle heating in a marine A/C unit, a reversing valve reverses the flow of freon. Normally the evaporator / fan blows cold into the cabin while the condenser expels the heat into the water. When reversed, the evaporator / fan blows heat into the cabin and the condenser expels the cold into the water. Unit BTU ratings are based on it’s cool mode. The reverse cycle heat mode produces 10-15% more BTU’s than the unit does in cooling mode

Technical Specifications

Model M9
Cooling Capacity 9,000 BTU’s
Voltage 110V
Running Amperage 8.0 A
Unit Length 16 inches
Unit Width 11.5 inches
Unit Height 12 inches