Mermaid M9 Cool and Electric Heat Unit – 9,000 BTU’s – 110V. With a cooling capacity of 800 cubic ft, the Mermaid 9,000 BTU unit is designed to cool / heat up to a 30′ cruiser or a 32′ sailboat. The ultimate in climate control, this unit packs the perfect punch of cool, comfortable air to keep your cabin temperate. M9EH110.

Mermaid M9 Cool & Electric Heat Unit – 9,000 BTU’s – 110V

With a cooling capacity of 800 cubic feet, the Mermaid 9,000 BTU unit is designed to cool / heat up to a 30′ cruiser or a 32′ sailboat.

The smallest 9,000 BTU on the market; it is almost the same size as the Mermaid M6 unit. In order to keep the smallest footprint on the market, Mermaid utilizes the same stainless steel base as the Mermaid M6 (6500 BTU) unit. This unit will run off of a Honda 2000 generator. This unit is available in right, left, or top air discharge configurations. Mermaid uses a 6″ and 4″ ducting and recommend a minimum of three 4″ round supply grills with this installation.

With Electric Heating Function
When the electric heating feature is activated on your Mermaid A/C unit, a radiant heat strip placed in the evaporator shroud heats up and the fan blows 5,680 BTUs of hot air into the cabin. Neither the compressor nor the water pump is required for this. This means the electric heating feature can be run even while the boat is out of the water.

Take note though, electric heat mode draws more power than reverse cycle heating (10 extra amps).

Technical Specifications

Model M9
Cooling Capacity 9,000 BTU’s
Voltage 110V
Running Amperage 7.0 A
Electric Heat 18.5
Unit Length 16 inches
Unit Width 11.5 inches
Unit Height 12 inches